Classification and composition of tempering furnace

Tempering equipment description: The glass tempering unit is mainly composed of four parts: the discharge section, the convection heating section, the flat tempering section, and the section extraction section, as well as high-pressure centrifugal fans, air supply pipes, air collection boxes, air circuits, electrical control cabinets, and operating desks. GANTRY COLUMN STRUCTURE HORIZONTAL STRAIGHT CUTTING BANDSAWS CH-650 The forced convection leveling tempering unit adopts a unique injection flow increasing technology. By sucking hot air in the furnace and mixing it with preheated compressed air in the nozzle, the temperature of the airflow ejected from the nozzle to the glass surface is greatly increased, and the hot air in the furnace is circulated by convection. The forced reinforcement, the uniformity and stability of the furnace temperature are improved, so that the heating effect of the glass in the furnace is better. Compared with general compressed air convection models, the compressed air consumption is reduced by more than half.GANTRY COLUMN STRUCTURE HORIZONTAL STRAIGHT CUTTING BANDSAWS CH-800 The transmission of each part of the unit adopts AC frequency conversion technology, driven by a motor, and the reciprocating drive speed is adjustable; the operation of each part is automatically completed by the control system composed of industrial computers and PLC; Electric balance, automatic on-off of the main air valve;High Pressure Gas Quenching Technology For Gears The main drive of the furnace body and air grid adopts O-shaped belt drive, and the furnace body adopts triple compound drive synchronization technology, that is, orthogonal circular drive belts plus interconnected circular drive belts; the main drive of the inlet and outlet tables adopts chain drive, with a simple and reliable structure. ;The furnace body and the main drive of the air grid are equipped with a manual emergency film output function when the power is cut off. According to customer needs, an emergency power supply device can also be added to ensure the low-speed operation of the ceramic roller table of the furnace body after a power failure.Six details of gas carburizing