¿Qué materiales y herramientas de arte suelen incluirse en los kits de pintura por número? Me gustaría saber qué pinturas, pinceles y otros materiales se proporcionan para asegurarme de tener todo lo que necesito para comenzar el proceso creativo.
top of page
PÓNGASE EN CONTACTO
Calle Segunda 202 , 22830, Ensenada, B.C., México.
Tel: 646 174 00 45
WhatsApp: 646 185 33 60
bottom of page
The heating equipment is mainly single-chamber furnace, push rod furnace and desktop annealing furnace. All heating furnaces use natural gas as fuel. The heating temperature of steel ingots is generally 1150 ℃ ~ 1240 ℃. Gas carburizing technology The heating time of cold steel ingots is about 1 to 5 hours. The heating time is half of the heating time of the cold steel ingot, and the heated steel ingot enters the forging process.Aviation gear vacuum furnace application Forging: The steel ingot is taken out of the heating furnace after being heated to about 1150-1240°C, and then put into the air hammer or electro-hydraulic hammer by the manipulator. Monitor the forging size and control the forging temperature by infrared thermometer.Low alloy wear-resistant steel and its vacuum heat treatment process Inspection: Preliminary inspection is carried out on the forging blank, mainly the inspection of appearance and size. In terms of appearance, the main inspection is whether there are cracks and other defects. In terms of size, the blank allowance must be within the range required by the drawings, and records should be made.Application of Vacuum Heat Treatment in Fastener Manufacturing